Reliable Ammonia Catalyst Solution
Fe–Mo Formaldehyde Catalyst JQ Series | SYAMCAT




JQ116/JQ216/JQ316 Fe–Mo Formaldehyde Catalysts
SYAMCAT JQ116, JQ216 and JQ316 are iron–molybdenum oxide catalysts for the selective oxidation of methanol to formaldehyde. Grade selection should match the reactor design, process-gas composition, pressure-drop requirements and target formaldehyde production.

Compare Grades Using the Same Basis
The grades have different published dimensions, bulk densities and strength entries. Identical nominal dimensions do not establish identical grade performance or interchangeable loading. Confirm the grade-specific specification and loading plan for the unit.
Methanol conversion, formaldehyde yield and selectivity are separate performance measures. Compare them at the same methanol concentration, gas flow, temperature profile, sampling method and calculation basis. Operating life is assessed for the actual unit and any agreed guarantee conditions.
Physical Comparison and Performance Evaluation
Use the physical entries below as a starting point for a specification review. Request the current technical data sheet and strength test method. Performance acceptance requires a documented test basis and operating stage; it is not an unconditional complete-conversion claim.
|
Item
|
SYAMCAT JQ116
|
SYAMCAT JQ216
|
SYAMCAT JQ316
|
|
Dimensions/mm(OD *ID*L)
|
4.7*2.0*4.7
|
4.7*2.0*3.0
|
4.7*2.0*4.7
|
|
Bulk density kg/L
|
0.84-0.92
|
0.86-0.92
|
0.82-0.90
|
|
Crushing strength, N/particle
|
8-11
|
7-9
|
8-10
|
Mo/Fe atomic ratio | 2.4-2.6 | 2.4-2.6 | 2.4-2.6 |
Selection and Acceptance
Technical data
Request the current grade-specific technical data sheet and supplied-form information.
Project criteria
Agree the operating basis, loading requirements and acceptance criteria for the actual unit.
Prepare Your Technical Enquiry
- Reactor and tube dimensions, loading arrangement and existing catalyst grades.
- Methanol concentration, oxygen/air supply, gas flow and temperature profile.
- Pressure-drop limit, target product concentration and performance definitions.
- Operating history, impurity information, sample/test basis and planned replacement date.
Start with the information already available. Missing process details can be clarified during the technical review.
Discuss Your Catalyst Requirements- 加载中···
- Name
- Phone
- *Title
- *Content
- Name
- Phone
- *Title
- *Content

