Reliable Ammonia Catalyst Solution
J117/J118 Nickel Methanation Catalysts






J117/J118 Nickel Methanation Catalysts
SYAMCAT J117 and J118 are nickel-based methanation catalysts for removing residual carbon monoxide and carbon dioxide from hydrogen-rich process gas. Methanation consumes hydrogen and converts carbon oxides into methane and water.

Purification Duty and Grade Selection
In ammonia plants, this purification step helps protect the downstream ammonia synthesis catalyst. In hydrogen service, the resulting methane must be considered against the product-gas specification. Selection depends on the inlet gas and required outlet quality.
The inlet CO and CO₂ concentrations and their fluctuations determine the reaction heat load. Confirm the allowable temperature rise and the plant protection strategy. Oxide-form and pre-reduced products require the startup procedure applicable to the actual grade and supplied form.
Physical Data and Operating Review
The physical comparison below identifies the existing J117/J118 entries. Confirm purchase specifications, supplied form and test methods against the current grade-specific technical data sheet. Operating limits require the actual gas composition, pressure basis, flow basis and allowable temperature rise.
|
Item
|
SYAMCAT J117
|
SYAMCAT J118 |
|
Shape
|
Tablets
|
Spheres |
|
Size/mm
|
φ5*4.5-5.5
|
φ3.5-5.5 |
|
Catalyst system
|
Nickel-based
|
Nickel-based |
Bulk density/(kg.L-1) | 1.10-1.30 | 0.90-1.10 |
Selection and Acceptance
Technical data
Request the current grade-specific technical data sheet and supplied-form information.
Project criteria
Agree the operating basis, loading requirements and acceptance criteria for the actual unit.
Prepare Your Technical Enquiry
- Reactor type, loading volume and current catalyst grade.
- Inlet CO, CO₂, hydrogen, moisture and impurities, including wet or dry concentration basis.
- Inlet temperature, pressure with absolute or gauge basis, flow and expected operating variations.
- Required outlet CO/CO₂ and methane specification, activation facilities and startup constraints.
Start with the information already available. Missing process details can be clarified during the technical review.
Discuss Your Catalyst Requirements- 加载中···
- Name
- Phone
- *Title
- *Content
- Name
- Phone
- *Title
- *Content
